Integrated Systems - Plate Tester

Plate Tester Our Inspection Technologies designs and builds large-scale systems for heavy plate testing as on-line or off-line systems in its general program of automatic ultrasonic inspection machines. These systems consist of the complete test mechanism and test electronics, extended by automated evaluation software and web/ modem-based remote servicing. Product dimensions vary between 1.5 m – 5 m ( 4.92 - 16.40 ft.) in width and 6 mm – 100 mm ( .24 - 3.94 in.) in thickness. Product lengths are up to 55 m ( 180 ft.) . The plate inspection may be executed from above ( top-down method) or below ( bottom-up method) the plate‘ s surface. Principally sheared ( final) and non-sheared ( mother plates) plates can be inspected. Feature : • Body inspection system with 2 inspection frames for 100% body test in one run ( from bottom up or from top down depending customers request) • Extension of the body inspection systems with a longitudinal edge and a head and tail tester • Alternative -> A scanner system is available to inspect heavy plates positioned in the inspection area • Probe holders with hardened steel slides, covering a closed water area with separate water inlet and outlet, ( asymmetrical suspension) • Multiple T/ R ( separate Transmitter and Receiver crystals) probes are applied for the inspection • Testing speed can be controlled between 250mm/ s ( .82 inches/ s) and 1000mm/ s ( 3.28 inches/ s) • The system can be integrated into customers high level IT and quality assurance networks • Documentation stating the condition of every plate evaluated according to the chosen standard Applications : • High quality plates for various applications with strong requirements in regard to the size of defects to be detected Informasi lebih lanjut hubungi kontak dibawah ini: Office : Jl.Radin Inten II No 61 B Duren Sawit Jakarta Timur Phone : 021-29563045 ( hunting) Hp : 08156141954 Fax : 021-29563052 Pin BB : 284152F7 Email : sales@ testingindonesia.com Website : www.testingindonesia.com