EL-USB-ACT AC and DC Millivolt Data Logger with Current Clamp Input

EL-USB-ACT AC and DC Millivolt Data Logger with Current Clamp Input • Compatible with a.c. and d.c. current clamps • Energy monitoring mode ( to calculate power, cumulative energy and cumulative cost) • a.c. and d.c. millivolt measurement mode • Logging rates between 1s and 12hr • 4mm banana plug inputs When used with a current clamp, this standalone data logger measures and stores up to 127, 232 a.c. and d.c. current readings over a 0 to 1000 amp d.c. measurement range ( 0 to 723 amps for a.c.) . In ‘ energy monitoring’ mode, this data is converted into power, energy ( using a user defined voltage value) and cost ( using a user supplied energy unit cost) . The millivolt measurement mode allows for direct measurement of voltage, up to 1V d.c. ( 700mV a.c.) . The user can easily set up the logger and view downloaded data by plugging the data logger into a PC’ s USB port and using the supplied software. The software has provision for a clamp scaling factor ( the clamp input-output ratio of amps to millivolts) . Stored data can then be graphed, printed and exported to other applications. The high contrast LCD can show a variety of current, power, energy and cost information. At the touch of a button, the user can cycle between the most recent, maximum and minimum measurement values. The data logger is fitted with 2 replaceable AA batteries. Informasi lebih lanjut hubungi kontak dibawah ini: Office : Jl.Radin Inten II No 61 B Duren Sawit Jakarta Timur Phone : 021-29563045 ( hunting) Hp : 08156141954 Fax : 021-29563052 Pin BB : 284152F7 Email : sales@ testingindonesia.com Website : www.testingindonesia.com